riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com page 11 pow er derating curve 0 20 40 60 80 100 0 20 40 60 70 80 100 120 140 155 ambient temperature (c) power (%) type clsa0402 clsa0603 clsa0805 CLSA1206 clsa2010 clsa2512 standard power rating (w) 0.0625 0.1 0.125 0.25 0.75 1.0 high power rating (w) 0.125 0.25 0.5 1.0 2.0 standard resistance range (w) 0.05 to 1.0 0.02 to 1.0 0.01 to 1.0 high resistance range (w) 0.05 to 1.0 temperature coeffcient (depending on ohmic value) 200 to 400 ppm 200 to 600 ppm 100 ppm upon request high temperature coeffcient (depending on ohmic value) 200 to 400 ppm 200 to 300 ppm tolerances 1% / 2% / 5% operating temperature range -55 to +155c dimensions (lxw) mm [inches] 1.00 x 0.50 [0.04 x 0.02] 1.60 x 0.80 [0.06 x 0.03] 2.00 x 1.25 [0.08 x 0.05] 3.10 x 1.55 [0.12 x 0.06] 5.00 x 2.50 [0.20 x 0.10] 6.30 x 3.10 [0.25 x 0.12] packaging (pcs) tape and reel 10,000 5,000 4,000 clsa series ? aec-q200 compliant ? resistances from 0.01 to 1ohms ? power rating to 2 watt ? resistance tolerances to 1% ? tcrs to 100 ppm/c ? alumina substrate for high power dissipation ? sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 specifications current sensing chip resistor ordering information part description: part type - resistance - tolerance - tcr - packaging - high/standard rating example: clsa 2512 0.500ohms 1% 100ppm hp (note: if no tcr is specifed the highest value will be supplied. standard rating will be given if not specifed) 09/13
riedon inc. 300 cypress avenue alhambra ca 91801 (626) 284-9901 (626) 284-1704 www.riedon.com page 12 clsa series current sensing chip resistor test requirement test method temperature coeffcient of resistance as spec. -55c to 125c, 25c reference temperature short time overload 0.5%+0.05 rcwv*2.5 or max. overload voltage for 5 seconds insulation resistance >10g max. overload voltage for 1 minute load life 1.0%+0.05 702c, max. working voltage for 1000 hrs with 1.5 hrs on and 0.5 hrs off biased humidity 1.0%+0.05 1000hrs 85c/85% rh 10% of operating power high temperature exposure 0.5%+0.05 at +155c for 1000 hrs bending strength as spec. bending once for 5 seconds with 3mm thermal shock 0.5%+0.05 -55c/+155c. 300 cycles with maximum trans - fer time of 20 seconds. dwell time 15 minutes air to air solderability 95% min. coverage 2455c for 3 seconds resistance to soldering heat 0.5%+0.05 2605c for 10 seconds voltage proof no breakdown or fashover 1.42 times rcwv (rms) for 1 minute leaching individual leaching area <5% total leaching area <10% 2605c for 30 seconds temperature cycling 0.5%+0.05 -55c to +125c, 1000 cycles moisture resistance 1.0%+0.05 24hrs/cycle mechanical shock 0.25%+0.05 wave form: tolerance for half sine pulse peak value of 100gs. normal duration (d) is 6 vibration 0.5%+0.05 5 gs for 20 min., 12 cycles each of 3 orienta - tions, 10-2000 h esd 1.0%+0.05 human body, 2kv flame retardance no flame present temperature sensing at 500c, voltage power subjected to 32vdc current clamped up to 500adc and decreased in 1.0vdc/hour resistance to solvents marking unsmeared add aqueous wash chemical - okem clean or equivalent. do not use banned solvents. terminal strength not broken force of 1.8kg for 60 second environmental characteristics 09/13
|
